Base can’t get a GPS signal or is showing Magnetic Interference

No GPS

  1. Make sure that you are outside, away from any buildings or dense foliage. Typically, backyards/front yards are not the best place to test or use SOLOSHOT3 because of its' proximity to buildings, trees and power lines.
  2. Pick up the Base and move to a new location several feet away from the original calibration attempt to initiate a new auto-calibration. 

 

Magnetic Interference

  1. Pipes running underneath the ground, power lines, grandstands, metal fences or structures can throw off the Base’s compass in reading magnetic north, which is essential for accurate tracking.
  2. Pick up the Base and move to a new location several feet away from the original calibration attempt to initiate a new auto-calibration. 

 

If you have tried several different attempts for locations following the guidelines above, please contact us for additional help! Example footage of the problem you are seeing, and your environment are very helpful.

Still Need Help?